, ,

CNC HD R Model Stub With Carbide Tip

Description

  • Capable of withstanding very high rpm at high loads.
  • Suitable for CNC and other high-speed turning centers.
  • The bearings used are of GERMAN / JAPANESE make.
  • Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
  • For higher speeds than specified special centers can be supplied against request.
Part No. Shank Taper Point Style Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT2 CNC HDR S MT-2 Stub Point 20 46 17.780 25.0 50.5 64.0 150 0.008 6300
HSC MT3 CNC HDR S MT-3 Stub Point 28 62 23.825 34.0 64.5 81.0 375 0.008 4500
HSC MT4 CNC HDR S MT-4 Stub Point 32 68 31.267 41.0 65.0 102.5 600 0.008 3450
HSC MT5 CNC HDR S MT-5 Stub Point 38 87 44.399 51.0 83.0 129.5 1500 0.008 2700
HSC MT6 CNC HDR S MT-6 Stub Point 50 102 63.348 57.5 101.5 182 2600 0.015 2300
Categories: , ,

Models

Part No. Shank Taper Point Style Ød2 C.T. mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT3 CNC HDR S CT MT-3 Stub C. T. Point 14 28 62 23.825 34.0 64.5 81.0 375 0.008 4500
HSC MT4 CNC HDR S CT MT-4 Stub C. T. Point 14 32 68 31.267 41.0 65.0 102.5 600 0.008 3450
HSC MT5 CNC HDR S CT MT-5 Stub C. T. Point 18 38 87 44.399 51.0 83.0 129.5 1500 0.008 2700
HSC MT6 CNC HDR S CT MT-6 Stub C. T. Point 18 50 102 63.348 57.5 101.5 182 2600 0.0015 2300

Load Diagram

Service life of Roller bearing is 2000 Operating Hours

Spare Point of CNC HD R Stub with Carbide Tip

Wedge to remove Revolving Center from Tailstock

Related products