,

Standard

(For Conventional Slow Speed Non-CNC Application)

Description

  • Turnmax offers India’s Largest range of live centers to suit specific needs.
  • Each Live Center is provided with an inspection report covering all critical parameters like runout, correctness of Morse Taper shank angle, etc.
  • Regular Precision models have 0.015 mm max. runout. Super precision models supplied against specific requests have run 0.008mm. These runout figures are under NO LOAD conditions and not under ACTUAL LOAD conditions. rotate the point in any one direction for 3 to 5 revolutions and then take the dial indicator reading for runout measurement while rotating the point in the SAME direction.
Part No. Model Shank Taper Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm
RC MT1 STD Standard MT-1 18.0 46.5 12.065 26.0 51.0 53.5 25 0.015
RC MT2 STD Standard MT-2 23.0 50.0 17.780 31.0 61.0 64.0 50 0.015
RC MT3 STD Standard MT-3 30.0 62.0 23.825 38.0 70.5 81.0 75 0.015
RC MT4 STD Standard MT-4 30.0 62.0 31.267 38.0 73.5 102.5 100 0.015
RC MT5 STD Standard MT-5 34.0 68.0 44.399 42.0 78.0 129.5 150 0.015
RC MT6 STD Standard MT-6 50.0 105.0 63.348 58.0 91.0 182.5 200 0.015

Models

Part No. Model Shank Taper Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm
RC MT1 STD Standard MT-1 18.0 46.5 12.065 26.0 51.0 53.5 25 0.015
RC MT2 STD Standard MT-2 23.0 50.0 17.780 31.0 61.0 64.0 50 0.015
RC MT3 STD Standard MT-3 30.0 62.0 23.825 38.0 70.5 81.0 75 0.015
RC MT4 STD Standard MT-4 30.0 62.0 31.267 38.0 73.5 102.5 100 0.015
RC MT5 STD Standard MT-5 34.0 68.0 44.399 42.0 78.0 129.5 150 0.015
RC MT6 STD Standard MT-6 50.0 105.0 63.348 58.0 91.0 182.5 200 0.015

Spare Point of Standard Model