, ,

CNC HD R Model Extended Point With Carbide Tip

Description

  • Capable of withstanding very high rpm at high loads.
  • Suitable for CNC and other high-speed turning centers.
  • The bearings used are of GERMAN / JAPANESE make.
  • Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
  • For higher speeds than specified special centers can be supplied against request.
Part No. Shank Taper Point Style Ød1 mm Ød2 C.T. mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT3 CNC HDR E CT MT-3 Extended C.T. Point 14 11 28 62 23.825 51.0 64.5 81.0 200 0.008 4500
HSC MT4 CNC HDR E CT MT-4 Extended C.T. Point 14 11 32 68 31.267 54.5 65.0 102.5 225 0.008 3450
HSC MT5 CNC HDR E CT MT-5 Extended C.T. Point 18 14 38 87 44.399 65.0 83.0 129.5 425 0.008 2700
HSC MT6 CNC HDR E CT MT-6 Extended C.T. Point 22 18 50 102 63.348 81.0 101.5 182 900 0.015 2300

Models

Part No. Shank Taper Point Style Ød1 mm Ød2 C.T. mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT3 CNC HDR E CT MT-3 Extended C.T. Point 14 11 28 62 23.825 51.0 64.5 81.0 200 0.008 4500
HSC MT4 CNC HDR E CT MT-4 Extended C.T. Point 14 11 32 68 31.267 54.5 65.0 102.5 225 0.008 3450
HSC MT5 CNC HDR E CT MT-5 Extended C.T. Point 18 14 38 87 44.399 65.0 83.0 129.5 425 0.008 2700
HSC MT6 CNC HDR E CT MT-6 Extended C.T. Point 22 18 50 102 63.348 81.0 101.5 182 900 0.015 2300

Load Diagram

Service life of Roller bearing is 2000 Operating Hours

Spare Point of CNC HD R Extended with Carbide Point

Wedge to remove Revolving Center from Tailstock