, ,

CNC HD R Model Profiled Point

Description

  • Capable of withstanding very high rpm at high loads.
  • Suitable for CNC and other high-speed turning centers.
  • The bearings used are of GERMAN / JAPANESE make.
  • Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
  • For higher speeds than specified special centers can be supplied against request.
Part No. Shank Taper Point Style Ød1 mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L3 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT2 CNC HDR P MT-2 Profiled Point 8 20 46 17.780 35.0 50.5 16 64.0 80 0.008 6300
HSC MT3 CNC HDR P MT-3 Profiled Point 10 28 62 23.825 47.0 64.5 20 81.0 240 0.008 4500
HSC MT4 CNC HDR P MT-4 Profiled Point 12 32 68 31.267 53.0 65.0 26 102.5 300 0.008 3450
HSC MT5 CNC HDR P MT-5 Profiled Point 14 38 87 44.399 65.0 83.0 30 129.5 725 0.008 2700
Categories: , ,

Models

Part No. Shank Taper Point Style Ød1 mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L3 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT2 CNC HDR P MT-2 Profiled Point 8 20 46 17.780 35.0 50.5 16 64.0 80 0.008 6300
HSC MT3 CNC HDR P MT-3 Profiled Point 10 28 62 23.825 47.0 64.5 20 81.0 240 0.008 4500
HSC MT4 CNC HDR P MT-4 Profiled Point 12 32 68 31.267 53.0 65.0 26 102.5 300 0.008 3450
HSC MT5 CNC HDR P MT-5 Profiled Point 14 38 87 44.399 65.0 83.0 30 129.5 725 0.008 2700

Load Diagram

Service life of Roller bearing is 2000 Operating Hours

Spare Point of CNC HD R Model Profiled

Wedge to remove Revolving Center from Tailstock

Related products