, ,

CNC HD R Model Stub With Carbide Tip

Description

  • Capable of withstanding very high rpm at high loads.
  • Suitable for CNC and other high-speed turning centers.
  • The bearings used are of GERMAN / JAPANESE make.
  • Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
  • For higher speeds than specified special centers can be supplied against request.
Part No. Shank Taper Point Style Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT2 CNC HDR S MT-2 Stub Point 20 46 17.780 25.0 50.5 64.0 150 0.008 6300
HSC MT3 CNC HDR S MT-3 Stub Point 28 62 23.825 34.0 64.5 81.0 375 0.008 4500
HSC MT4 CNC HDR S MT-4 Stub Point 32 68 31.267 41.0 65.0 102.5 600 0.008 3450
HSC MT5 CNC HDR S MT-5 Stub Point 38 87 44.399 51.0 83.0 129.5 1500 0.008 2700
HSC MT6 CNC HDR S MT-6 Stub Point 50 102 63.348 57.5 101.5 182 2600 0.015 2300

Models

Part No. Shank Taper Point Style Ød2 C.T. mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT3 CNC HDR S CT MT-3 Stub C. T. Point 14 28 62 23.825 34.0 64.5 81.0 375 0.008 4500
HSC MT4 CNC HDR S CT MT-4 Stub C. T. Point 14 32 68 31.267 41.0 65.0 102.5 600 0.008 3450
HSC MT5 CNC HDR S CT MT-5 Stub C. T. Point 18 38 87 44.399 51.0 83.0 129.5 1500 0.008 2700
HSC MT6 CNC HDR S CT MT-6 Stub C. T. Point 18 50 102 63.348 57.5 101.5 182 2600 0.0015 2300

Load Diagram

Service life of Roller bearing is 2000 Operating Hours

Spare Point of CNC HD R Stub with Carbide Tip

Wedge to remove Revolving Center from Tailstock