, ,

Interchangeable CNC HD R Profiled Point

Description

  • Capable of withstanding very high rpm at high loads.
  • Suitable for CNC and other high-speed turning centers.
  • The bearings used are of GERMAN / JAPANESE make.
  • Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
  • For higher speeds than specified special centers can be supplied against request.
Part No. Shank Taper Internal Female Style Ød mm Ød1 mm Ød2 mm ØD mm ØD1 mm L1 mm L2 mm L3 mm L4 mm L mm Max. Job Wt. Kg. Conc. Error Mm Max. RPM
HSC MT3 CNC HDRP MT-3 1:10 28 10 22 62 23.825 40 50 62.5 20 81 50 0.010 5000
HSC MT4 CNC HDRP MT-4 1:10 32 12 26 68 31.267 49 59 65.0 26 102.5 125 0.010 3800
HSC MT5 CNC HDRP MT-5 1:10 38 14 32 87 44.399 57 67 80.5 30 129.5 200 0.010 3000
Categories: , ,

Models

Part No. Shank Taper Internal Female Style Ød mm Ød1 mm Ød2 mm ØD mm ØD1 mm L1 mm L2 mm L3 mm L4 mm L mm Max. Job Wt. Kg. Conc. Error Mm Max. RPM
HSC MT3 CNC HDRP MT-3 1:10 28 10 22 62 23.825 40 50 62.5 20 81 50 0.010 5000
HSC MT4 CNC HDRP MT-4 1:10 32 12 26 68 31.267 49 59 65.0 26 102.5 125 0.010 3800
HSC MT5 CNC HDRP MT-5 1:10 38 14 32 87 44.399 57 67 80.5 30 129.5 200 0.010 3000

Load Diagram

Service life of Roller bearing is 2000 Operating Hours

Spare Point CNC HD R Model with Draw off Nut Extended Point

Wedge to remove Interchangeable Point from Female Sleeve

Related products