, ,

CNC HD R Model Extended Point

Description

  • Capable of withstanding very high rpm at high loads.
  • Suitable for CNC and other high-speed turning centers.
  • The bearings used are of GERMAN / JAPANESE make.
  • Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
  • For higher speeds than specified special centers can be supplied against request.
Part No. Shank Taper Point Style Ød1 mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT2 CNC HDR E MT-2 Extended Point 10 20 46 17.780 35.0 50.5 64.0 100 0.008 6300
HSC MT3 CNC HDR E MT-3 Extended Point 12 28 62 23.825 51.0 64.5 81.0 300 0.008 4500
HSC MT4 CNC HDR E MT-4 Extended Point 14 32 68 31.267 54.5 65.0 102.5 375 0.008 3450
HSC MT5 CNC HDR E MT-5 Extended Point 16 38 87 44.399 65.0 83.0 129.5 900 0.008 2700
HSC MT6 CNC HDR E MT-6 Extended Point 18 50 102 63.348 81.0 101.5 182 1875 0.015 2300
Categories: , ,

Models

Part No. Shank Taper Point Style Ød1 mm Ød mm ØD mm ØD1 mm L1 mm L2 mm L mm Max. Job Wt. Kg. Conc. Error mm Max. RPM
HSC MT2 CNC HDR E MT-2 Extended Point 10 20 46 17.780 35.0 50.5 64.0 100 0.008 6300
HSC MT3 CNC HDR E MT-3 Extended Point 12 28 62 23.825 51.0 64.5 81.0 300 0.008 4500
HSC MT4 CNC HDR E MT-4 Extended Point 14 32 68 31.267 54.5 65.0 102.5 375 0.008 3450
HSC MT5 CNC HDR E MT-5 Extended Point 16 38 87 44.399 65.0 83.0 129.5 900 0.008 2700
HSC MT6 CNC HDR E MT-6 Extended Point 18 50 102 63.348 81.0 101.5 182 1875 0.015 2300

Load Diagram

Service life of Roller bearing is 2000 Operating Hours

Spare Point CNC HD R Model Extended Point

Wedge to remove Revolving Center from Tailstock

Related products