, ,

Interchangeable CNC HD R Stub Point

Description

  • Capable of withstanding very high rpm at high loads.
  • Suitable for CNC and other high-speed turning centers.
  • The bearings used are of GERMAN / JAPANESE make.
  • Bearing lubricated for life using KLUBER GERMANY make ISOFLEX NBU-15 Grease.
  • For higher speeds than specified special centers can be supplied against request.
Part No. Shank
Taper		 Point
Style		 Internal Female
Style		 Ød mm Ød1 mm ØD mm ØD1 mm L1 mm L2 mm L3 mm L mm Max. Job Wt.
Kg.		 Conc. Error
mm		 Max.
RPM
HSC MT3 CNC HDR S MT-3 Stub Point 1:10 28 24 62 23.825 28.0 38.0 64.5 81.0 100 0.015 4500
HSC MT4 CNC HDR S MT-4 Stub Point 1:10 32 28 68 31.267 32.5 42.5 65.0 102.5 110 0.015 3450
HSC MT5 CNC HDR S MT-5 Stub Point 1:10 38 34 87 44.399 41.0 51.0 83.0 129.5 175 0.015 2700
Categories: , ,

Models

Part No. Shank
Taper		 Point
Style		 Internal Female
Style		 Ød mm Ød1 mm ØD mm ØD1 mm L1 mm L2 mm L3 mm L mm Max. Job Wt.
Kg.		 Conc. Error
mm		 Max.
RPM
HSC MT3 CNC HDR S MT-3 Stub Point 1:10 28 24 62 23.825 28.0 38.0 64.5 81.0 100 0.015 4500
HSC MT4 CNC HDR S MT-4 Stub Point 1:10 32 28 68 31.267 32.5 42.5 65.0 102.5 110 0.015 3450
HSC MT5 CNC HDR S MT-5 Stub Point 1:10 38 34 87 44.399 41.0 51.0 83.0 129.5 175 0.015 2700

Load Diagram

Service life of Roller bearing is 2000 Operating Hours

Spare Point of Interchangeable CNC HD R Stub Point

Wedge to remove Interchangeable Point from Female Sleeve

Related products