Standard Carbide Tip

Description

Turnmax offers India’s Largest range of live centers to suit specific needs.
Each Live Center is provided with an inspection report covering all critical parameters like runout, correctness of Morse Taper shank angle, etc.
Regular Precision models have 0.015 mm max. runout. Super precision models supplied against specific requests have run 0.008mm. These runout figures are under NO LOAD conditions and not under ACTUAL LOAD conditions. rotate the point in any one direction for 3 to 5 revolutions and then take the dial indicator reading for runout measurement while rotating the point in the SAME direction.

Part No.	Model	Shank Taper	Ød mm	ØD mm	ØD1 mm	L1 mm	L2 mm	L mm	Max. Job Wt. Kg.	Conc. Error mm
RC MT1 STD	Standard	MT-1	18.0	46.5	12.065	26.0	51.0	53.5	25	0.015
RC MT2 STD	Standard	MT-2	23.0	50.0	17.780	31.0	61.0	64.0	50	0.015
RC MT3 STD	Standard	MT-3	30.0	62.0	23.825	38.0	70.5	81.0	75	0.015
RC MT4 STD	Standard	MT-4	30.0	62.0	31.267	38.0	73.5	102.5	100	0.015
RC MT5 STD	Standard	MT-5	34.0	68.0	44.399	42.0	78.0	129.5	150	0.015
RC MT6 STD	Standard	MT-6	50.0	105.0	63.348	58.0	91.0	182.5	200	0.015

Models

Part No.	Model	Shank Taper	Ød mm	ØD mm	ØD1 mm	L1 mm	L2 mm	L mm	Max. Job Wt. Kg.	Conc. Error mm
RC MT1 STD	Standard	MT-1	18.0	46.5	12.065	26.0	51.0	53.5	25	0.015
RC MT2 STD	Standard	MT-2	23.0	50.0	17.780	31.0	61.0	64.0	50	0.015
RC MT3 STD	Standard	MT-3	30.0	62.0	23.825	38.0	70.5	81.0	75	0.015
RC MT4 STD	Standard	MT-4	30.0	62.0	31.267	38.0	73.5	102.5	100	0.015
RC MT5 STD	Standard	MT-5	34.0	68.0	44.399	42.0	78.0	129.5	150	0.015
RC MT6 STD	Standard	MT-6	50.0	105.0	63.348	58.0	91.0	182.5	200	0.015